Vitopod Thermostat Not Working

If you've landed on this page it's looking like you may be having some problems with your Vitopod thermostat. Not to worry - we'll soon have you growing again! 

Deluxe Thermostat Controller for Vitopod Propagator

If you're experiencing problems with your thermostat it's worth trying the below reset procedure. This should get everything working again - if not please give us a call on 01695 554 097 or send us the readings to as explained below so that we know what we need to do to get you growing again.


Test the Thermostat

Plug the thermostat into the wall and conduct the following 2 tests

A: Place the probe in a glass of cold water for 5 minutes and note the temperature

B: Hold the probe in your hand for 5 minutes and note the temperature

Let us know the temperature readings


Test the base

Plug the base into the wall without the thermostat for one hour and check the temperature – if it doesn’t rise the problem is the base.

If you have a different thermometer you can use that to check the temperature.

Reattach the base and thermostat and set the thermostat and leave for two hours. If the Vitopod does not now start working correctly please let us know the readings above and we will be able to determine which part is defective and we can get you growing again


If you have any questions please do not hesitate to contact us at or give us a call! Our Gardening Angels are always happy to help!