Pack includes all the components required to link two Duogrow Self Watering Planters (Available Seperately) together via the Smart Reservoirs. Once connected simply water in to one of the smart reservoirs to water the entire system. The Smart Reservoirs will fill evenly across each connected unit when placed on a flat level surface. The system ensures even water distribution and is infinitely extendable.
Fitting Instructions: First select a flat area to locate your Duogrow Self Watering Planters. Remove the blanking plug from the end hole in each of the Smart Reservoirs. Place the 2 washers over the 2 connector spouts and insert them through the hole in the end of each of the Smart Reservoirs. Place the nut on the outside of the connector and hand tighten until secure. Do not over tighten. Screw in the root filters in to the end of the connectors on the inside of the smart reservoir on both units, again, do not over tighten. Firmly push the hose on to the connector on one unit and place in your chosen position, add the second unit on to the other end of the hose and firmly push the hose on to the connector. Your Smart Reservoirs are now linked and ready for use. To connect multiple units, simply connect each unit in a continuous chain as per the instructions above.